Interestingly share the development trend of automotive connectors. Nano series low-voltage outsourcing connectors - connectors - Nabichuan.

Automotive connectors are the core components of connectors that perform electrical connection functions. Generally, a contact pair is composed of a positive contact and a negative contact, and electrical connection is completed through the insertion of the negative and positive contacts. The male contact is a rigid part, and its shape is cylindrical (circular pin), square cylindrical (square pin), or flat (insert). Male contacts are generally made of brass and phosphor bronze. The female contact, namely the socket, is the key part of the contact pair. It relies on the elastic deformation of the elastic structure during insertion with the contact pin to generate elastic force and form close contact with the male contact to complete the connection. There are many types of jack structures, including cylindrical (slotted, necked), tuning fork, cantilever (longitudinally slotted), folded (longitudinally slotted, 9-shaped), box (square), and hyperbolic spring jacks.

In addition to the general design evaluation materials and applications of connectors, basic structural components are available in copper (non) and stainless steel (non) types, and the materials used for their connectors are also different.

Currently, the working temperature of the connector is between - 50 ° C and 70 ° C, and the voltage standing wave ratio (VSWR) refers to the working voltage, that is, the relative voltage standing wave ratio. The sinusoidal standing wave ratio refers to the maximum of 2.

, insulating layer materials, moving parts, fixed parts, and annular principle. The key and corresponding sheath and connector have similar important uses, making it always a platform for maintaining appliances, lighting instruments, and lighting devices.

If there is no screw on the back, the screw is connected with a straight head or elbow, and please do not use an elastic wrench and adjust it.

At the connection. Is it possible to block the elastic wrench when using soft or cold pressing terminals. Metal pleated tubes, clips, ratchet wrenches, and clip sleeves require specialized screw clip tools to be introduced into terminal production. Is there a sense of responsibility when using customized special cable connectors.

Solutions to reduce cable connections to failures by 2022 predict significant impact on alarm and noise impacts. In 2022, the number of numerical predictions that significantly reduce the impact of cable connections on failures on alarms and noise shows no (e.g., connectors that are mechanically damaged due to mechanical metal tape) predicted defects due to changes in alarms and noise.

Expensive labor is required to provide "termination" snap on connectors as a wiring system that is only suitable for mechanical devices. There are several distribution systems on the market with single card connection systems.

Some users do not know how to measure optical fiber slip ring data. Here is a brief introduction to the correct method for fiber optic rotary connectors.

Infrared light sources and optical power meters directly test the data of the optical path, while red light pens are often used to test the on-off of the optical path.

Optical fiber rotary connectors are generally used for many years, and the loss data becomes larger after repeated plugging and use. It's okay! Polishing and grinding of optical fiber connectors can be performed to restore the original appearance.